At present, about 80% of the application range of Submersible Slurry Pump For Heavy Oil is used in the mining industry concentrator. Due to the poor working conditions of ore primary selection, the service life of the Drilling Mud System is generally low in this section. In addition to the home wheel, the product adds a stirring impeller at the bottom to spray the precipitated slag into a mixed liquid of water and solid particles. The pump can achieve high concentration delivery without auxiliary equipment. The unique sealing device can effectively balance the pressure inside and outside the oil, balance the pressure at both ends of the mechanical seal, ensure the reliable operation of the mechanical seal to the maximum extent, greatly extend the service life, and the motor can increase the water inlet detection according to user requirements. Various protection devices such as overheating enable the product to operate safely for a long time under severe working conditions.
The submersible slurry pump is a coaxial pump and motor. When working, the pump shaft rotates the pump impeller to transfer energy to the slurry medium to generate a certain flow rate, which drives the solid material to flow and realize the slurry transportation. Its main feature is that the whole machine is a dry motor pump structure. The motor is mechanically sealed to prevent high pressure water and impurities from entering the motor cavity.
In addition to the main impeller, there is also a stirring impeller, which can extract the slag deposited on the bottom of the water into a turbulent flow and extract it. The main over-current components such as impeller and stirring impeller are made of high wear-resistant material, which is resistant to abrasion, corrosion, clogging and strong discharge, and can effectively pass large solid particles. It is not restricted by the suction stroke, the slag absorption efficiency is high, and the dredging is more thorough. No need to equip the auxiliary vacuum pump, the investment is cheaper.